• SITIO EN ESPANOL

TECHNICAL SUPPORT

Quick Tips for installing Brake Pads

Customers expect quiet, clean, dependable, and safe brakes. The following reminders will help get the best installation results for Monroe Brakes™ Brake Pads.

Rotors should be replaced
or resurfaced with a fine,
nondirectional finish.

Wash rotor with
non-detergent (clear) liquid
cleanser and warm water.

Do not touch, or contaminate
friction material.

Lubricate sliding surfaces
and back of pad
with brake lubricant.

Inspect all components.
Replace worn hardware,
including pad installation clips.

Open bleeder and then
compress piston. Do not hammer
to set pads in place.

Torque lug nuts
using star pattern.

High-speed break-in is NOT
required or recommended.Follow
manufacturer’s recommendation.

Check temperature of
all four brakes to ensure
balanced braking effort.

Download and print these Installation Tips.

This document is provided in PDF format. Acrobat Reader® required.
Get the latest version for free from Adobe.