Condition | Code | Procedure |
---|---|---|
Applies too much assist (oversensitive) | A | Require replacement |
Attaching hardware broken | A | Require repair or replacement of hardware |
Attaching hardware missing | C | Require replacement of hardware |
Attaching hardware not functioning | A | Require repair or replacement of hardware |
Auxiliary vacuum pump inoperative | A | Require repair or replacement |
Inoperative includes intermittent operation or out of OEM specification. | ||
Check valve grommet deteriorated, affecting performance | A | Require replacement of grommet |
Check valve grommet deteriorated, not affecting performance | 1 | Suggest replacement of grommet |
Check valve inoperative | A | Require repair or replacement |
Inoperative includes intermittent operation. | ||
Check valve leaking | A | Require replacement of check valve |
Check valve missing | C | Require replacement of check valve |
Check valve noisy | 2 | Suggest replacement |
Connector (Weatherpack type) leaking | A | Require repair or replacement |
Connector broken | A | Require repair or replacement |
Connector melted | A | Require replacement |
Determine cause and correct prior to replacement of part. | ||
Connector missing | C | Require replacement |
Leaking | A | Require replacement |
Terminal burned, affecting performance | A | Require repair or replacement |
Determine cause and Correct prior to repair or replacement of part. | ||
Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
Terminal corroded, affecting performance | A | Require repair or replacement |
Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
Terminal loose, affecting performance | B | Require repair or replacement |
Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
Threads damaged | A | Require repair or replacement |
Threads stripped (threads missing) | A | Require replacement |
Vacuum hose filter leaking | A | Require replacement of filter |
Vacuum hose filter restricted | A | Require replacement of filter |
Wire lead burned | A | Require repair or replacement |
Wire lead conductors exposed | B | Require repair or replacement |
Wire lead open | A | Require repair or replacement |
Wire lead shorted | A | Require repair or replacement |
A | Part no longer performs intended purpose |
B | Part does not meet a design specification (regardless of performance) |
C | Part is missing |
1 | Part is close to the end of its useful life (just above discard specifications, or weak; failure likely to occur soon, etc.) |
2 | To address a customer need, convenience, or request (to stiffen ride, enhance performance, eliminate noise, etc.) |
3 | To comply with maintenance recommended by the vehicle's Original Equipment Manufacturer (OEM) |
4 | Technician's recommendation based on substantial and informed experience |