 |
|
|
|
|
Rotors should be replaced or resurfaced with a fine, nondirectional finish.
|
|
Wash rotor with non-detergent (clear) liquid cleanser and warm water.
|
|
Do not touch, or contaminate friction material.
|
|
Lubricate sliding surfaces and back of pad with brake lubricant.
|
|
Inspect all components. Replace worn hardware, including pad installation clips.
|
|
Open bleeder and then compress piston. Do not hammer to set pads in place.
|
|
Torque lug nuts using star pattern.
|
|
High-speed break-in is NOT required or recommended. Follow manufacturer’s recommendation.
|
|
Check temperature of all four brakes to ensure balanced braking effort.
|
