 |
|
|
|
|
Inspect the Drum for out-of-round
and "bell-mouth" conditions. Drum may be replaced or remove wear lip by refinishing.
|
|
Wash drum with non-detergent (clear) liquid cleanser and
warm water.
|
|
Do not touch, or contaminate friction material.
|
|
Press pivot pins in with vise. Do not use hammer to install pins!
|
|
Clean, inspect and lubricate backing plate.
|
|
Inspect and clean or replace hardware, springs and adjuster.
|
|
Inspect for frozen or leaking wheel cylinders. Inspect for leaking axle seals.
|
|
Adjust shoes to drum.
|
|
Inspect parking brake operation.
|
|
Torque lug nuts using
star pattern.
|
|
High-speed break-in is NOT required or recommended! Follow manufacturer's recommendation.
|
|
Check temperature of all four brakes to ensure balanced braking effort.
|
